Fiido Electric Bike Battery Case Upper Cover for L3

Solid tire 200x50 8" scooters, and others according to dimensions. 

8.5*3 inch tire for zero 9, T9 scooter, vsett 9

TUOVT brand

Applicable Voltage: 48V

• Applicable Power: <1500w

• Max. Working Current: 30A

• Continuous Maximum Current: 20A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Dimensions: 64x49x11mm

Good quality BMS

Made of high quality material, durable and practical to use

12-80V Electric Scooter Electric Bicycle Front Lamp Light With Horn  for Kugoo and other scooters.

Red wire - positive light

Black wire - Negative GND

Yellow wire - horn positive

Solid tire 200x50 8" fits Kugoo 1s and E-twow scooters, and others according to dimensions. 

Front LED light for scooter Arctic V3.1 (1200LM 12-80V)

 HORN LIGHT SWITCH and directions

Instruction:

Orange Cable Positive  wire (+) 

White Wire GND (-)

Cable Brown Left indicator light

Cable Green Flashing light right

Black Horn Cable

Purple Cable Light

Rear mudguard EMS, Beaster, Extreme X1-21, EVO EV-5

Rear mudguard EMS, Beaster, Extreme-X

Solid tire 200x60 8"  with vsett 8 and other scooters according to dimensions.

10 Inch Tires Tube 10x2.50 60/85-6 Pneumatic Tire for Electric Scooter

Charger 67.2V (60V) 2A DC 5.5mm connector for scooter or ebike

- lnput: 100-240VAC,50/60Hz;

- Output: 67.2V 2A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 67.6V 2A Charger

Charger 58.8V (52V) 2A DC 5.5mm connector for scooter or ebike

- lnput: 100-240VAC,50/60Hz;

- Output: 58.8V 2A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 58.8V 2A Charger

Charger 54.6V (48V) 2A DC 5.5mm connector for scooter or ebike

- lnput: 100-240VAC,50/60Hz;

- Output: 54.6V 2A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 54.6V 2A Charger

Tubeless cityroad tire 8×3-5 (80/65-5) [Innova]

Valid for Kaabo Mantis 8.

Solid Tyre 10x3 6.5 for scooter. Non pneumatic tire.

Charger 54.6V (48V) 3A DC 5.5mm connector for scooter or ebike

- lnput: 100-240VAC,50/60Hz;

- Output: 54.6V 3A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 54.6V 3A Charger

Applicable Voltage: 48V

• Applicable Power: <1800w

• Max. Working Current: 40A

• Continuous Maximum Current: 30A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Dimensions: 82x61x11mm

Good quality BMS

 90/65 6.5" TYRE

Applicable Voltage: 52V

• Applicable Power: <1600w

• Max. Working Current: 40A

• Continuous Maximum Current: 30A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Good quality BMS

Solid scooter tire 10×2.75-6.5 offroad

Seat suitable for Fiido D2/D2S/D3/D3S/L3 electric bike

Tyre NIU for Escooters CST 9.5x2.5

Applicable Voltage: 52V

• Applicable Power: <1600w

• Max. Working Current: 40A

• Continuous Maximum Current: 30A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Good quality BMS

Applicable Voltage: 52V

• Applicable Power: <1600w

• Max. Working Current: 40A

• Continuous Maximum Current: 30A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Good quality BMS

Ultralight solid tire 14×2.125 non pnaumatic punctureproof for bicycle

Tire 14*2.125 Tubetype For Unicycle or bicycle. Strengthened structure.

There will by only tire without tube.

Rated voltage: 48V.

Maximum voltage: 58v.

Power: 800W (1200W Max.)

Current: 21A Max.

Size: 97x67x35mm

Fits for Smartgyro Rockway & Speedway and other bicycles or scooters

matching LCD: S866 Display

Front Suspension Kit for electric scooter. Fits some Beaster scooter, EMS, riedis S10 models

Applicable Voltage: 60V

• Applicable Power: <1800w

• Max. Working Current: 40A

• Continuous Maximum Current: 30A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Dimensions: 82x61x16mm

Good quality BMS

Charger 84V (72V) 3A DC 5.5mm connector for scooter or ebike with fan

- lnput: 100-240VAC,50/60Hz;

- Output: 84V 3A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 84V 3A Charger

Applicable Voltage: 60V

• Applicable Power: <2400w

• Max. Working Current: 50A

• Continuous Maximum Current: 40A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Dimensions: 82x61x16mm

Good quality BMS

S866 Electric Bike LCD Display Electric Bicycle Display LCD Meter 24V 36V 48V 60V Scooter Control Panel

1. Wide Range of Uses: Easy to install and use, comes with LCD screen display bracket, suitable for 22.2mm/0.9in handlebars.

2. Durable Material: LCD display is made of high quality ABS material and is lightweight, waterproof and durable, and long service life.
3. Simple Operation: Easy to install and disassemble, without any difficult requirements even though you use it for the first time.
4. Large Screen: LCD display makes it easier for you to view the data on the panel, and the status is displayed on the large screen more intuitively.
5. See Clearly: The backlight allows you to see the screen clearly even in the dark environment, and the key operation is fast and convenient.

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Nominal voltage: 36v (For Lion 10s batteries)
Voltage cut: 29v
Nominal current: 20A
Peak current: 25A
Nominal power: 720w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Nominal voltage: 48v (For Lion 12s batteries)
Voltage cut: 37v
Nominal current: 20A
Peak current: 25A
Nominal power: 1000w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Maximum voltage admitted: 58v
Nominal voltage: 48v (For Lion 12s batteries)
Voltage cut: 37v
Nominal current: 23A
Peak current: 28A
Nominal power: 1100w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

Applicable Voltage: 60V

• Applicable Power: <3600w

• Max. Working Current: 80A

• Continuous Maximum Current: 60A

• Over-discharge Protection Voltage: 2.6v

• Overcharge Protection Voltage: 4.25v

• Charging Current: max. 10A

• Balance Voltage: 4.2v

• High Temperature Discharge: 75 ℃

• Low Temperature Charge: - 7 ℃

Good quality BMS

Protective Armor Motorcycle Or Scooter.

Please check the size table in pictures. Usually you need to to choose 1 size bigger then you usually wear.

Folding Handlebar for Electric Scooter

Foldable sports handlebar has zero free play. When unfolded, the hadlebar is extremely rigid and performs like a one-piece solid frame handlebar. Works for Zero 10X, Inokim OX, Inokim OXO and other scooters which has mounting place of 25.4 or 31.8mm (main standard diameters).

25.4mm/31.8mm*620mm

Size: Stretch length: 620mm; Tube diameter: 22; Folded width: 136mm

This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current can reach 30A.

● 13 cell series protection for Lithium Battery pack (13*4.2=54.6V Lithium Ion Battery ),client can select suitable type based on your battery characteristics( this BMS can be adjusted also for 12S 13S 14S 15S li ion or Lifepo4 Battery

● Various protection functions for charging and discharging ( over-charge , over-discharge ,high or Low temperature protection ,over-current protection , short circuit protection etc ) with double layers protection hardware and software protection .

●Precise SOC calculation with SOC function of automatic learning

● Automatically charge battery function or static balance function for the battery system

● Equipped with Bluetooth module with isolated UART which can enable the user to view battery information on our APP or Computer software which can be provided by us .client can use the PC software to set the protection parameters flexibly,client can download software with our appointed link

● With SW Port for output controlling

Generic Kit 36V 350W Display Brigmton type – model 2

Controller for Zero X10 front motor B

52V25A Controller Original Parts for ZERO 10X Electric Scooter

Kyasang brand

Controller for Zero X10 front motor A

52V25A Controller Original Parts for ZERO 10X Electric Scooter

Kyasang brand

Controller + display Generic Kit 36V 350W fits for some Xiaomi clones

Controller characteristics:

Nominal voltage: 36v

protection voltage: 30v

Nominal power: 350W

Maximum current: 17A

nominal current: 10A

Wheels: 8.5 inches

3 driving modes limited to 20, 25 and 30 km/h

Bus cable length: 131cm

The connection of any component of the kit in any other electronic component other than this kit, as well as a bad connection, voids its guarantee. It is sold as a kit to be completely installed on an electric scooter or VMP.

Controller compatible with QS-4 display.

Controller for motors with hall sensors. Features:

Configurable for 36v and 48v.

Protection voltage: 30v for 36v and 40v for 48v.

Maximum current: 15A

Nominal current: 7A

Maximum power: 500w at 36v and 700w at 48v.

Rated power: 250w at 36v and 350w at 48v.

Measurements: Check images.

Compatibility: Generic and customizable

Battery kit for electric scooters and electric bikes. The kit contains Built-in BMS protection,With overcharge, over discharge, short circuit protection

We can istall the battery at our repairshop Shift.lt at Kalvarijų 82, Vilnius. 

For more details and spec please see below.

Battery features .
-Capacity: 6.4Ah
-Voltage: 36v
-Cells: 18650 LG MH1 3200mAh  LG 18650 MH1 
-Configuration: 10S2P
-Connector discharge and charge: XT 60 Female

BMS Characteristics:
-Maximum charge: 42v(4.2v per cell) -Balancing start
: 4v
-Cutoff voltage:30v (3v per cell)
-Maximum discharge(peak current): 15A
-Recommended discharge (continuous discharge): 10A
- BMS with common charging port.

Battery dimensions: 132x74x58mm

Battery X7BDH 36v 5Ah fits Cecotec, Bongo scooters

Please check photos for conectors and shape.

Battery capacity 5Ah / 180Wh.

Battery 36v 7.8Ah Kugoo S1

-Capacity: 7.8 Ah

-Voltage: 36V

-Cells: EVE ICR18650-26V 2550mAh

-Configuration: 10S3P

-Discharger and charge connector: XT 60 male

-Dimensions: 295x67x38mm

We can install the battery at our repair-shop Shift.lt at Kalvarijų 82, Vilnius. 

For more details and spec please see below.

Battery characteristics

Capacity: 10.4Ah
Voltage: 36v
Cells: EVE ICR18650-26V 2550mAh
Configuration:10S4P
Discharge connector: XT 60 Male
Charging connector: DC 8mm female (Xiaomi type)

Features: Easy installation

Product Details: Inner diameter: 8mm

Length:2 Meter

Material: PP

Useful for: Cable Organization, Wiring Harness, 3D Printers, DIY Projects.

Feature:

1. No matter Lead-acid batteries, lithium batteries, water batteries, dry batteries.
2. All kinds of electric vehicle (12V to 99V) can be automatically identified and displayed in real time.
3. Through the voltage number to determine the fault of electric vehicle, twice the result with half the effort.
4. By turning the real-time voltage value can accurately determine the amount of remaining power, convenient for customers to drive.
5. The real-time voltage value can accurately judge whether the lithium battery is damaged.

Tyre NIU for scooters CST 9.5x2.5

13 Inch Tubeless Tires 13x5.00-6.5

Steering damper for electric scooters.

Designed for Ultron scooters, but adaptable to other brands.

Controller characteristics:

Nominal voltage: 36v

protection voltage: 30v

Nominal power: 350W

Maximum current: 17A

nominal current: 10A

Wheels: 8.5 inches

3 driving modes limited to 20, 25 and 30 km/h

Bus cable length: 131cm

Manufacturer XBOT

The connection of any component of the kit in any other electronic component other than this kit, as well as a bad connection, voids its guarantee. It is sold as a kit to be completely installed on an electric scooter or VMP.