Accessories

Seat Foldable Shock Absorbing Saddle for Xiaomi PRO, PRO2 scooter

€52.20

43.14€ VAT excluded

Wishlist

Ninebot MAX G30

NINEBOT MAX G30 Front wheel (not original)

€49.99

41.31€ VAT excluded

Wishlist

Shop

QS-S4 LCD Throttle ZERO x8 10x KABO

€49.00

40.5€ VAT excluded

Wishlist

Inokim

Inokim OX OXO lights regulator

€49.99

41.31€ VAT excluded

Wishlist

Shop

Xiaomi M365 PRO battery BMS kit

€69.00 €49.00

40.5€ VAT excluded

Xiaomi M365 PRO electric scooter battery management kit (battery BMS kit).
Protects the battery from overcharging or discharging, allows the battery to operate only in safe operating ranges, controls its temperature.
The set includes: main control board, side bridges.

Wishlist

Xiaomi

Xiaomi M365 PRO, PRO2. 1S controller V3 (main board)

€59.99

49.58€ VAT excluded

Wishlist

Xiaomi

Xiaomi M365 controller (main board)

€49.99

41.31€ VAT excluded

Wishlist

Shop

Rear suspension ESPARTS for Xiaomi M365, M365 Pro, PRO2, 1S, Essential, Mi Scooter 3

€59.87

49.48€ VAT excluded

This version fits on Xiaomi models: M365, M365 Pro, PRO2, 1S, Essential, Mi Scooter 3. Raw model: One adjustable spring. Fits both PRO and regular models.
Package contents: 1x Monorim V2 Suspension Kit, 1x Tool Set
All tools needed for installation are included. Please follow the video guide available. The estimated installation time is 30 minutes. Note: The scooter is not included.

Wishlist

Xiaomi

Xiaomi M365 PRO original dashboard with screen

€55.00

45.45€ VAT excluded

Wishlist

Shop

BMS 16S 60V 30A with active balance Battery controller with charging wire

€49.99

41.31€ VAT excluded

Applicable Voltage: 60V

Applicable Power: <1800w
Max. Working Current: 40A
Continuous Maximum Current: 30A
Over-discharge Protection Voltage: 2.6v
Overcharge Protection Voltage: 4.25v
Charging Current: max. 10A
Balance Voltage: 4.2v
High Temperature Discharge: 75 ℃
Low Temperature Charge: - 7 ℃

Dimensions: 82x61x16mm

Good quality BMS

Wishlist

Inokim

INOKIM OX front rim

€44.99

37.18€ VAT excluded

Wishlist

Accessories

Xiaomi Portable Electric Air Compressor 2 pump

€59.99

49.58€ VAT excluded

Wishlist

Shop

QS-S4 LCD Throttle with thumb throttle

€59.99

49.58€ VAT excluded

The QS-S4 is a trigger throttle and LCD display that is ubiquitous in the parts bins of electric scooter manufacturers around the world. Fits Zero, Kabo Mantis ant a lot of other scooters.

LCD display with built-in ergonomic thumb throttle.

Valid for 24/36/48/52 and 60v batteries and controllers.

It has a USB output to charge devices. Includes 10 cm cable with IP65 waterproof connector for greater durability and protection against rain.

Wishlist

Spare parts

Charger 84V (72V) 3A DC 5.5mm connector for scooter or ebike with fan

€49.99

41.31€ VAT excluded

Charger 84V (72V) 3A DC 5.5mm connector for scooter or ebike with fan

- lnput: 100-240VAC,50/60Hz;

- Output: 84V 3A;

- Charge indicator: Charging the red light is full of green light;

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protectio;

- Color: Black;

- Plug: EU;

Package included: 1Pcs 84V 3A Charger

Wishlist

Shop

Controller for KUGOO M4 pro electric scooter

€59.99

49.58€ VAT excluded

Wishlist

Xiaomi

Xiaomi PRO 2 folding pole rod (copy/clone)

€69.99

57.84€ VAT excluded

Xiaomi PRO, PRO 2 folding pole rod (copy) bending tube/pole. The rod is not original, but is perfect for Xiaomi PRO 2.

Wishlist

Xiaomi

Xiaomi 1S, 3 folding pole rod (copy)

€69.99

57.84€ VAT excluded

Xiaomi 1S, 3 folding pole rod (copy) bending handlebar. The rod is not original, but is perfect for Xiaomi 1S, 3. Does not fit for PRO models

Wishlist

Ninebot MAX G30

Main controller for Ninebot Max G30 Xbot

€59.99

49.58€ VAT excluded

Main controller for Ninebot Max G30 electric scooter.

The controller is unlocked to 35km/h and not flashable. Power is the same as original controller, works really great.

If you motor number starts with 6, so speed wil be up to 30km/h

if yours motor serial number starts with 9 so it will go up to 35km/h

Wishlist

Tires ant tubes for scooters and bikes

Front wheel with inflatable tire for Kugoo M4 Pro electric scooter

€49.99

41.31€ VAT excluded

Wishlist

Shop

67.2V 2A Lithium Battery Charger 16S 60V Li-ion Battery Charger High quality With cooling fan

€49.00

40.5€ VAT excluded

Brand New and high quality Super strong protection.

- lnput: 100-240VAC,50/60Hz

- Output: 67.2V 2A

- Charge indicator: Charging the red light is full of green light

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protection

- Color: Black - Power Max: 150W

- Plug: EU

Package included: 1Pcs 67.2V 2A Charger

Suits For: Inokim OX,OXO models also Zero X10

Wishlist

Shop

BMS 16S 60V 40A with active balance Battery controller with charging wire

€59.99

49.58€ VAT excluded

Applicable Voltage: 60V

Applicable Power: <2400w
Max. Working Current: 50A
Continuous Maximum Current: 40A
Over-discharge Protection Voltage: 2.6v
Overcharge Protection Voltage: 4.25v
Charging Current: max. 10A
Balance Voltage: 4.2v
High Temperature Discharge: 75 ℃
Low Temperature Charge: - 7 ℃

Dimensions: 82x61x16mm

Good quality BMS

Wishlist

Electronic components for electric scooters and bicycles

XH9 36V Scooter Display

€49.99

41.31€ VAT excluded

Wishlist

Electronic components for electric scooters and bicycles

Controller 48V 17A 350w without screen

€49.99

41.31€ VAT excluded

Wishlist

Spare parts

24V 250w Electric Scooter Controller Kit with Panel for Electric Scooter Replacement Repair

€49.99

41.31€ VAT excluded

Responsive Control: The controller provides stable speed and responsive control of braking and directional changes for your electric scooter that is very practical.
Waterproof Panel: Made of premium plastic materials, light, strong and durable, with fine workmanship, good toughness and waterproof performance, providing better protection for the internal circuit, making it more durable.
Power and Speed Clearly Visible: The meter instantly displays the data panel, with a cool and clear display and power and speed are clearly visible on the screen.
High Compatibility: The interface is XT30, with high compatibility, both Hall brushless motors and DC motors can use this controller kit.
Grooved Design Controller Housing: The controller housing is made of premium aluminum alloy with a grooved design, which the internal circuits from thermal overload due to good heat dissipation.

Wishlist

Shop

S866 Electric Bike LCD Display Electric Bicycle Display LCD Meter 24V 36V 48V Scooter Control Panel

€49.99

41.31€ VAT excluded

S866 Electric Bike LCD Display Electric Bicycle Display LCD Meter 24V 36V 48V 60V Scooter Control Panel

1. Wide Range of Uses: Easy to install and use, comes with LCD screen display bracket, suitable for 22.2mm/0.9in handlebars.

2. Durable Material: LCD display is made of high quality ABS material and is lightweight, waterproof and durable, and long service life.
3. Simple Operation: Easy to install and disassemble, without any difficult requirements even though you use it for the first time.
4. Large Screen: LCD display makes it easier for you to view the data on the panel, and the status is displayed on the large screen more intuitively.
5. See Clearly: The backlight allows you to see the screen clearly even in the dark environment, and the key operation is fast and convenient.

Wishlist

Spare parts

Controller J&P 36V 25A Without Hall sensors for scooter or bike

€74.99

61.98€ VAT excluded

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Nominal voltage: 36v (For Lion 10s batteries)
Voltage cut: 29v
Nominal current: 20A
Peak current: 25A
Nominal power: 720w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

Wishlist

Spare parts

Controller J&P 48V 25A Without Hall sensors for scooter or bike

€74.99

61.98€ VAT excluded

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Nominal voltage: 48v (For Lion 12s batteries)
Voltage cut: 37v
Nominal current: 20A
Peak current: 25A
Nominal power: 1000w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

Wishlist

Spare parts

Seat for Kugoo M4 PRO scooter

€59.99

49.58€ VAT excluded

Wishlist

Shop

QS-S4 72V LCD Throttle ZERO 11

€69.00

57.02€ VAT excluded

Wishlist

Spare parts

Controller J&P 48V 28A Without Hall sensors for scooter or bike

€79.99

66.11€ VAT excluded

The recognized brand J&P has more resistant controllers with higher performance, presenting the same characteristics as other controllers.

Prepared to work without hall sensors (if the engine has them, they are left disconnected).
Maximum voltage admitted: 58v
Nominal voltage: 48v (For Lion 12s batteries)
Voltage cut: 37v
Nominal current: 23A
Peak current: 28A
Nominal power: 1100w

Compatible with J&P display: J&P 36V-60V LCD display Throttle 6pin

Wishlist

Xiaomi

Controller for Xiaomi Mi4 PRO 1st Gen

€59.99

49.58€ VAT excluded

Wishlist

Xiaomi

Controller Xiaomi Mi3 lite

€59.99

49.58€ VAT excluded

Wishlist

Inokim

Inokim OX/OXO right frame plastic

€59.99

49.58€ VAT excluded

Wishlist

Inokim

Inokim OX/OXO left frame plastic

€59.99

49.58€ VAT excluded

Wishlist

Shop

67.2V 2A Lithium Battery Charger Premium 16S 60V Li-ion Battery Charger High quality

€59.99

49.58€ VAT excluded

Brand New and high quality Super strong protection.

- lnput: 100-240VAC,50/60Hz

- Output: 67.2V 2A

- Charge indicator: Charging the red light is full of green light

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protection

- Color: Black - Power Max: 150W

- Plug: EU

Package included: 1Pcs 67.2V 2A Charger

Suits For: Zero X10 Vsett 10+ beastetr scooter ant others

Wishlist

Inokim

Original Controller Box for INOKIM OXO Electric Scooter to Accommodate Front Controller With Small Spare Parts & Gasket

€59.99

49.58€ VAT excluded

Wishlist

Inokim

Charger for electric scooter Inokim OXO 67,2V 2A Original

€59.99

49.58€ VAT excluded

Brand New and high quality Super strong protection.

- lnput: 100-240VAC,50/60Hz

- Output: 67.2V 2A

- Charge indicator: Charging the red light is full of green light

- Security protection: OVP/OCP/ Overload protection/ Short-circuit protection

- Color: Black

- Power Max: 150W

- Plug: EU

Package included: 1Pcs 67.2V 2A Charger

Suits For: Inokim OX,OXO, zero X10 models

If you need any other Inokim scooter parts, please contact us ;)

Wishlist

Xiaomi

Xiaomi 1S M365 Esential 3 original folding pole rod

€89.00

73.55€ VAT excluded

Xiaomi 1S/M365/Esential/3 bending handlebar. The rod is original.

Wishlist

Shop

BMS 16S 60V 60A with active balance Battery controller C/D same plug

€69.99

57.84€ VAT excluded

Applicable Voltage: 60V

Applicable Power: <3600w
Max. Working Current: 80A
Continuous Maximum Current: 60A
Over-discharge Protection Voltage: 2.6v
Overcharge Protection Voltage: 4.25v
Charging Current: max. 10A
Balance Voltage: 4.2v
High Temperature Discharge: 75 ℃
Low Temperature Charge: - 7 ℃

Good quality BMS

Wishlist

Spare parts

BMS 13S 48V 60A with balancing function 2 wires DALY

€64.99

53.71€ VAT excluded

Wishlist

Spare parts

Segway Ninebot ES original steering wheel set

€69.99

57.84€ VAT excluded

Wishlist

Shop

Folding Handlebar Inokim OX or Zero X10

€99.00 €89.00

73.55€ VAT excluded

Folding Handlebar for Electric Scooter

Foldable sports handlebar has zero free play. When unfolded, the hadlebar is extremely rigid and performs like a one-piece solid frame handlebar. Works for Zero 10X, Inokim OX, Inokim OXO and other scooters which has mounting place of 25.4 or 31.8mm (main standard diameters).

25.4mm/31.8mm*620mm

Size: Stretch length: 620mm; Tube diameter: 22; Folded width: 136mm

Wishlist

Xiaomi

Xiaomi 1S PRO PRO2 motor with tire 350W 35km h not original

€89.99

74.37€ VAT excluded

Xiaomi 1S PRO PRO2 motor with tire 350W 35km h not original. The replacement part is not an original Xiaomi part, but its great quality, can reach even higher speeds that original motor.

350W, suits for Xiaomi models:

Xiaomi M365

Xiaomi MI 1S

Xiaomi M365 PRO

Xiaomi PRO2

Xiaomi Essential

Maximum speed with this motor is 35-37km/h with custom software aster unlocking scooter.

Wishlist

Shop

13S 48V 30A Smart BMS with BT and APP

€89.99

74.37€ VAT excluded

This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current can reach 30A.

● 13 cell series protection for Lithium Battery pack (13*4.2=54.6V Lithium Ion Battery ),client can select suitable type based on your battery characteristics( this BMS can be adjusted also for 12S 13S 14S 15S li ion or Lifepo4 Battery

● Various protection functions for charging and discharging ( over-charge , over-discharge ,high or Low temperature protection ,over-current protection , short circuit protection etc ) with double layers protection hardware and software protection .

●Precise SOC calculation with SOC function of automatic learning

● Automatically charge battery function or static balance function for the battery system

● Equipped with Bluetooth module with isolated UART which can enable the user to view battery information on our APP or Computer software which can be provided by us .client can use the PC software to set the protection parameters flexibly,client can download software with our appointed link

● With SW Port for output controlling

● With three temperature detectors ( one internal + two external ) to provide temperature monitoring on the battery

Wishlist

Shop

Bongo Blaupunkt Cecotec controller with lcd screen

€99.00

81.82€ VAT excluded

Wishlist

Xiaomi

OEM Controller (main board) for Xiaomi m365, pro, pro2, 1s

€89.00

73.55€ VAT excluded

Wishlist

Xiaomi

Xiaomi Mi4 controller

€79.99

66.11€ VAT excluded

Wishlist

Accessories

Xiaomi PRO/PRO2 lenta paspirtukui

€89.99 €79.99

66.11€ VAT excluded

Wishlist

Xiaomi

Xiaomi PRO2 original folding pole rod

€99.00

81.82€ VAT excluded

Xiaomi Mi PRO2 cooter bending pole. The rod is original.
Fits Xiaomi PRO and PRO2 models.
Upgraded newest folding mechanism.
Original Xiaomi part

Controller + display Generic Kit 36V 350W fits for some Xiaomi clones

Controller characteristics:

Nominal voltage: 36v

protection voltage: 30v

Nominal power: 350W

Maximum current: 17A

nominal current: 10A

Wheels: 8.5 inches

3 driving modes limited to 20, 25 and 30 km/h

Bus cable length: 131cm

The connection of any component of the kit in any other electronic component other than this kit, as well as a bad connection, voids its guarantee. It is sold as a kit to be completely installed on an electric scooter or VMP.

Wishlist

Shop

Controller + LCD display QS-S4 36/48V 250/350W

€99.99

82.64€ VAT excluded

Controller compatible with QS-4 display.

Controller for motors with hall sensors. Features:

Configurable for 36v and 48v.

Protection voltage: 30v for 36v and 40v for 48v.

Maximum current: 15A

Nominal current: 7A

Maximum power: 500w at 36v and 700w at 48v.

Rated power: 250w at 36v and 350w at 48v.

Measurements: Check images.

Compatibility: Generic and customizable

Shift

Shop by Category

25.4mm/31.8mm*620mm